Buy Digital Camera

Load your camera with a new SRT film reel 35 mm is a simple question. If you are new to the camera, but you should take some time to familiarize themselves with the process in detail.

They tended not to open the camera, if you absolutely sure it is not within the movie. If the movie, while outside the tape made of metal, the film is ruined. To check this, flip on the crank rewind button. Carefully turn the crank clockwise. When the handle turns freely, is not a film for the camera or the film was rewound in the cartridge security protection.

If the item is not lit, it is for the film in the camera. You need to rewind the film so you can back. Turn the camera with his head down and press the clutch. You can find the clutch in a small niche in the form of a triangle in the background. Press down until it is depressed. Back from the camera in vertical position, then crank the film clockwise until the handle turns freely.

Now you can get back. Enter the rewind button and pull up into a slow and regular motion. As you click the button at the top, you hear a click and the metal spring. Swing back completely open. If there is a paper tape into the machine, pull the rewind button and highlights from the band.

Take a new role to use, and the leader of the band of about five inches. Put the tape on the left side of the camera with the plastic nipples down. Keep the button rewind the tape, so in the form and press the button to the film cassette.

Now, take the leading film and pull through the plateau of the film, it is in the last two gears. Place the head in the narrow slits in the coil.

Following is the leading snagged on the spool, wind the crank handle once to look to see that the holes for the gears properly. If everything seems OK, close the back by clicking on the left, until you will hear.

Well, the wind on the shutter lever two more times. To the film, you have to press the shutter button once you have leverage at the end of his movement. At this point, the film makes a Glance counter. It should be noted 1st Not hungry. If you try to expand your movie does not help the film over the entire period of two executives, you may find the first picture is the fog. So, make sure the wind during the two frames.

Although the SRT is a solid film if you are not the film on the coil receiving authority properly, it is possible that the movie slips free. If this happens, the film is not in advance. In essence, you have the wind, by taking all your debts at a single frame.

Minolta has clearly what a problem because they contain a “Safe Load” indicator for the other models in the series SRT. Do not worry if you have one of the majority of the SRTS who do not have this feature. It is easy to check whether the film is loaded correctly.

With the same trick to find out how to rewind the movie. After closing the back and the wind angled lever to flip the film carefully and try to crank the film wind counterclockwise. (Not press, clutch) If you can crank more than half a revolution, probably the film slipped free. Wind again, it is good, open the back and download the movie right.

If the film seems to be OK, look at the wheel, if you rewind the film. If a film in motion by the camera, every time you in advance on the shutter button, the Rewind button, counter-clockwise.

After all the photos on the role, you must return to the back of the cartridge before the back and pull the cassette. If you are careful, you know, how that works. Press the clutch, then carefully rewind the film with the rewind button. You believe that if the film tugs to free spool. Spin the button a little longer, until it turns freely. Now you can remove the device and the film for the treatment.

go to panasonic camera

Incoming search terms for the article:

• where to buy minolta camera